Guangzhou Winshol Tech Co., Ltd. (Winshol) is an automatic screen printing machine manufacturer based in Guangzhou, China.
Guangzhou Winshol Tech Co., Ltd. (Winshol) is an automatic screen printing machine manufacturer based in Guangzhou, China.
WL-500JPDJ
Web guiding and rewinding for materials up to 500 mm wide, with a length counter and a listed maximum speed of 50 m/min. Rated supply: 220 V; power: 1 kW.
Request a QuoteThe WL-500JPDJ is a web guiding and rewinding machine for roll-fed materials up to 500 mm wide. Its listed configuration includes one web guiding unit and one length counter, bringing material alignment and length measurement into the rewinding process. The catalogue heading uses WL-500JPDJ, while its English caption and specification table shorten the model name to WL-500JP.
The maximum speed is listed as 50 m/min. The operating speed for a particular job should be established with the actual material, reel condition and winding requirements. It should not be treated as a guaranteed production rate for every substrate.
Provide the material thickness, width, edge condition, core size and the starting and finished reel dimensions before ordering. Maximum reel diameter, reel weight, tension range and numerical guiding accuracy are not defined in the supplied table and should be confirmed for the proposed configuration. Samples help assess tracking and winding quality.
The catalogue lists a net weight of 150 kg and a gross weight of 200 kg. Allow room for loading reels, operating the controls and routine access around the machine. Confirm local electrical requirements and how the rewinding step will connect with your existing workflow.
Explore our drying and web handling equipment or review the screen printing machine catalogue when planning the wider production process.
Roll-fed materials up to 500 mm wide that are suitable for the agreed guiding and rewinding process. Confirm thickness, edge condition, core size, reel diameter, reel weight and tension requirements using samples.
Web alignment during roll-to-roll rewinding
Length counting for roll material
Roll preparation and handling alongside a screen-printing workflow
| Model | WL-500JPDJ (WL-500JP in catalogue table) |
|---|---|
| Maximum web width | 500 mm |
| Maximum speed (catalogue rating) | 50 m/min |
| Web guiding unit | 1 set |
| Length counter | 1 set |
| Machine dimensions (L × W × H) | 1000 × 700 × 1200 mm |
| Net weight | 150 kg |
| Gross weight | 200 kg |
| Power supply | 220 V |
| Rated power | 1 kW |
Product questions
It guides and rewinds roll-fed material. The listed configuration includes one web guiding unit and one length counter. It is auxiliary web handling equipment; the supplied specification does not describe a screen-printing or drying station.
The same catalogue entry uses WL-500JPDJ in the product heading and WL-500JP in the English caption and specification table. This page presents that single entry. Quote both references when confirming the exact machine configuration.
The listed maximum web width is 500 mm and the listed maximum speed is 50 m/min. The practical operating speed depends on the material, reel condition and required winding quality, so confirm performance with the intended job.
These limits are not stated in the supplied catalogue table. Provide the required core size, starting and finished reel diameters, reel weight and material thickness so the winding configuration can be checked before ordering.
The catalogue specifies a 220 V supply, 1 kW rated power and machine dimensions of 1000 × 700 × 1200 mm. Net weight is 150 kg and gross weight is 200 kg. Confirm electrical details and allow additional space for reel loading and operation.
Send the material type, thickness and width; core size; reel diameters and weights; required length measurement; target speed; and winding-quality requirements. Include your current process layout so the web guiding, tension needs and handling arrangement can be reviewed.
